High Leverage We designed these L-keys to be longer in the largest sizes to increase leverage where it matters Tight Tolerances We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency Corrosion-Resistant We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion Clear Markings With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (0.050 inch and 1.3 mm are too small to laser mark and 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) Quick-Access Racks The included racks have hex-shaped slots that make it easy to take the large L-keys in and out without resistance Low-Profile Holders The included holders organize the ball end hex L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution
The 24-Piece Ball End and Flat End Hex L-Key Set includes 1.310 mm ball end L-keys, 1119 mm flat end L-keys, a hex key holder, and a hex key rack. The ball end keys are made from 8660 nickel chromium molybdenum steel that’s heat-treated to 5458 HRC and the flat end keys are made from 6150 chromium vanadium steel that’s heat-treated to 4450 HRC. All of the keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two waysboth with a high-visibility laser marking and a stamped marking (the 1.3 mm L-key is too small to laser mark and the 1.3, 1.5, and 2 mm keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way, and the steel hex key rack has hex-shaped slots that allow larger keys to be taken in and out without resistance.